Recording - Kedacom KSCA120 Series User Manual

Access Control System

Disk Full Strategy: Configure the video recording strategy when there is insufficient
storage space. Overwrite earlier data: when there is insufficient storage space,
overwrite the oldest videos; Stop: when there is insufficient storage space, stop
video recording automatically. Go to Event > Abnormality Linkage and select "Disk
Full" for Abnormality Type to remind user that local video recording has stopped.

Storage Device List: Display the status, capacity, progress and other information of
all storage devices; in "Status" column, it shows the status of storage devices such
as "Normal" (with a card and normally read and write), "Does not Exist" (without a
card), "Not Formatted" (need to format when first inserting a card) and etc.; in
"Progress" column, it shows the percentage of the formatting progress of the storage
card. Select the disk and click "Formatting" to format the selected disk.

Snapshot: Configure the save path of snapshots. According to actual requirements,
select "Local storage" (TF card in camera) or "FTP" (server) to save scheduled
snapshots and alarming snapshots.
Note: The storage card is installed in the camera when going out of the factory.
When using the local storage card for the first time, please click "Formatting" first.

3.6.2 Recording

When scheduled recording is enabled, the camera will record videos automatically in the
configured durations and save the videos in the storage card.
Configuration steps are shown below:
Picture 3-41 Storage Management
User Manual