Personnel Search - Kedacom KSCA120 Series User Manual

Access Control System
Tap "Finish" to complete personnel registration;
3)
Note: If the identity ID of the same ID type already exists when saving the information,
After finishing registration, it will skip to the registration interface. Tap "<" at top left
4)
corner and input the login password to exit.
Note: The snapshot may fail when not facing the camera rightly or the distance to the
2.3.2

Personnel Search

Tap Menu>Personnel>Personnel Search, and view, edit or delete the information of
registered personnel.
Picture 2-7 Register information
it will pop up "the identity ID already exists, please confirm if you would like to
save." Tap "OK" to overwrite the old data.
camera being too close or too far. When it occurs, tap "Snapshot Again" to
re-capture.
User Manual