Table of Contents
Advertisement
Access Control System
Note:
Picture 3-19 VSIP
1)
Select a method from the dropdown list of VMS Method, "IP Address" or
"Domain". If selecting "IP Address", input VMS address in "VMS Address
(IPv4)"; if selecting "Domain", input VMS domain name in "Registered
VMS Domain";
2)
Input "VMS Port Number", 5510 by default;
3)
Input "Camera UUID" and "Camera Password". Camera UUID is
distributed by VMS and the password needs no verification so you don't
have to input;
4)
When the camera is in NAT, select "Send NAT Probe Packets"; you can
select "Auto Networking" to enable function of auto networking;
5)
After finish, click "Save" to validate setting.
Please refer to the User Manual for PMC Client for adding cameras to the
VMS;
VSIP protocol only supports registering to VMS of this company or other
SDK-integrated back-end platforms.
User Manual
Advertisement
Table of Contents
