System Maintenance - Kedacom KSCA120 Series User Manual

Access Control System
3.7.6

System Maintenance

On the interface of "System Maintenance", you can reboot and upgrade cameras or perform other
maintenance over the device.

Reboot: Click "Reboot" to reboot the camera.

Auto Maintenance: Select "Enable", and configure Maintenance Cycle and Maintenance Time. Click
"Save" to validate setting.
 Upgrade: Upgrade system version. Click "Upgrade" and open local upgrade file in <*.pkg> format.
During upgrading, please do nothing but waiting. After upgrading, re-login to the web client. If it is
necessary to upgrade the web client, the system will prompt to download the plug-in.
Note: PT Upgrade is necessary only when there is BUG in the PT version.

Configuration Management: including partial restoration, complete restoration, configuration export
and import parameter.






Advanced Configuration: Only "admin" user can perform advanced configuration. Click
"Configuration", input the right password for advanced user and click "Confirm" to enter the
configuration interface. You can configure parameters such as VSIP Protocol Compatibility, Keep
Alive the Stream UDP and Network Adaptation if necessary.
Partial Restoration: Click this button and all parameters will restore to factory default except
network setting, access protocol, user info and RTSP authorization.
Complete Restoration: Click this button and all parameters will restore to factory default.
Restore Default PT Settings: Reset PT settings to factory default.
Configuration Export: After configuring camera mode, you can export the configuration to local
PC for copying the configurations. Click "Export" and select a local save path to export.
Import Parameter: You can import local configuration file from PC without manual setting. Click
"Import" and select local configuration file to import.
Picture 3-52 System maintenance
83
User Manual