Table of Contents
Advertisement
Access Control System
to the Ethernet device, thus the firewall module on the gateway or router starts to open
this port to other PCs on the internet.
3.3.3.7
By UPnP protocol, it's able to set up mapping relation between private network
and the internet. Internal port is camera port while external port is router port.
User can visit camera when accessing to the external port. Configuration steps
are as follows:
Select "Enable" to enable UPnP function;
1)
2)
Set alias, then user can search the alias directly from the network on PCs
which have enabled UPnP protocol in the broadcast domain of the same
Ethernet. Double-click the icon and the system will pop up a page
automatically for user to visit current IP address;
3)
Select "Auto" or "Manual" for Mapping Mode;
4)
Click "Save" to validate setting.
SMTP
Picture 3-28 SMTP
Simple Message Transfer Protocol, when an alarm is triggered, the system will
send email notification automatically through SMTP protocol. Configuration
steps are as follows:
User Manual
Advertisement
Table of Contents
