Table of Contents
Advertisement
Access Control System
Configure admin user password and email for claiming password. Click "Activate" to
2)
activate the device.
Activate through device
Start the device and it will prompt activation automatically. Operate according to the
prompts to finish activation. Please refer to chapter 2.1.1 for details.
Note:
To ensure the safety of device on internet, it is strongly recommended that you set a
strong password composed of at least 2 kinds of the following, numbers, upper-case
letters, lower-case letters or specific symbols with length of 8 to 16 characters.
Please modify the password periodically such as once every 3 months. If the device is
used in highly risky environment, suggest modifying the password monthly or weekly.
Please keep your username and password safe.
3.1.2
Configure Network Parameters
After activating the camera, modify camera network parameters through IPCSearch,
such as IP address, subnet mask and gateway.
1)
Run IPCSearch and the system will search the cameras in LAN automatically and
display the result on the list;
Picture 3-3 Activate through browser
User Manual
Advertisement
Table of Contents
