Kedacom KSCA120 Series User Manual page 50

Access Control System

Play




Picture 3-16 Local setting
Protocol: Select the stream output protocol, options including UDP and TCP,
default being TCP; UDP is applicable when the request for image quality is not
high and the network is unstable.
Performance: Select playing level from "Real-time", "Balanced" and "Smooth",
default being "Balanced". "Balanced" mode gives consideration of both
real-time playing and smooth playing; "real-time" ensures the shortest latency of
video playing but affects the smoothness of the video; "smooth" ensures smooth
playing of the video but affects the real-time performance of the video.
Decoded Process Mode: Select the process mode after decoding, options
including "Default" and "Brightness Enhance".
Enable Image Noise Reduction: Image noise reduction is decoding noise
reduction. Select this option to enable image noise reduction and it only
changes the viewing effect of current user. After selecting it, drag the slide bar
below to adjust the noise reduction level, including 4 levels. The higher the level
User Manual