Table of Contents
Advertisement
Access Control System
3.5.3
Abnormality Linkage
Configure the alarm linkage method for abnormal events. Operation steps are as follows:
1)
Select "Enable" and select an option from the dropdown list of Abnormality Type;
Note:
Disk Full: when the disk storage is insufficient.
Disk Error: when the disk cannot be recognized.
Internet Disconnected: when the device isn't connected to the internet normally.
2)
Select linkage type(s), which is/are the alarm output method(s) when an event
triggers an alarm;
3)
Click "Save" to validate settings.
3.6
Storage
3.6.1 Storage Management
When the camera is installed with a storage card and works normally, you can configure
scheduled recording and scheduled snapshot.
Picture 3-40 Abnormality Linkage
User Manual
Advertisement
Table of Contents
