Kedacom KSCA120 Series User Manual page 65

Access Control System
3.4.1.4
3.4.1.5
Night Cut
Picture 3-32 Night Cut
Select night cut mode from the dropdown list up to request. Explanation of
different modes is as follows:

Day: Under "Day" mode, the image keeps colored all the time.

Night: Under "Night" mode, the image keeps black and white all the time.

Auto (gain triggered): The camera switches day/night mode automatically
according to the gain values. When selecting this mode, configure
Sensitivity, Latency and Night Cut Threshold according to actual request.

Scheduled Day/Night: Under "Scheduled Day/Night" mode, click
"Edit Time" and configure "Day Mode Start Time" and "Day Mode End
Time" on the popup interface. The camera will switch day and night
modes according to the scheduled durations.
Effect Parameters
There are 2 modes of effect parameters by default, "Auto Mode" and
"Standard Mode". Alternatively, you can configure the parameters by actual
requirements and save them as a mode for future use.
User Manual