Time - Kedacom KSCA120 Series User Manual

Access Control System
Tap "Auto Blackout Duration" to enable or disable the function. If enabled, you can
configure the auto blackout time, the range being 10~300 s. If no operation is done
to the device in the configured duration, the device will go in stand-by mode. If
disabled, the device will not black out automatically.

Blackout Detection
Tap "Blackout Detection" to enable or disable blackout detection.
2.11.2

Time

Tap Menu>System>Time and configure "Time Format", "Time", "DST", "Start Time",
"Stop Time" and "Deviation Time".
 Time Format: Tap "Time Format" and select a displaying format of time, options
including "MM-DD-YYYY", "DD-MM-YYYY" and "YYYY-MM-DD". Tap "Save" to
validate setting.
 Time: Tap "Time" to enter time setting interface and configure date and time
manually; tap "Save" to validate setting.
 DST: Tap "DST" to enable or disable DST, and configure "Start Time", "Stop Time"
and "Deviation Time".
Picture 2-36 Time
User Manual