Kedacom KSCA120 Series User Manual page 38

Access Control System
Note: Alias is subject to the actual search result.
Select the device to be activated, right click and select "Activate". On the popup
3)
interface, configure admin user password and email for claiming password. Click
"Activate" to activate the device.
Note: When there are more than one non-activated devices, select the device and click
"Batch processing". On the popup interface, set admin user's password and the email
address to claiming password. Click "Activate" and wait for rebooting.

Activate through browser
1) Configure the IP address of PC in the same network segment as that of the camera
and input the camera address in browser. The device activation interface will pop up,
as shown below:
Picture 3-1 IPCSearch
Picture 3-2 Batch Processing
User Manual