Table of Contents
Advertisement
Access Control System
Note: This function is available only when email notification is enabled. Method to enable
email notification can be referred to in the chapter of Intelligent Function.
3.4
Camera
Go to Settings > Camera to configure camera parameters, including Image, OSD, Video,
Audio and PTZ interfaces.
3.4.1
Image
Go to Settings > Camera > Image, as shown below.
1)
Input SMTP server IP address and port number, which ranges 1 ~ 65535,
25 by default;
2)
Input "Sender" and "Sender Address"; optionally select "Server
Authentication" and input correct user name and password;
3)
Input email topic; optionally select "Attachment" and choose attached file
format, then the email sent will attach the relative file;
4)
Add receiver email address. Input the receiver's email address and click
the symbol "+" behind it and the address will be saved to the list below.
Select an address from the list and click the symbol "-" to remove the
email address;
5)
Click "Save" to validate setting.
Picture 3-29 Image
User Manual
Advertisement
Table of Contents
