Internal I/O Connectors; Sata (Serial Ata); Digital I/O Connector - DFI CMS630-Q470E User Manual

X Internal I/O Connectors

SATA (Serial ATA)

The Serial ATA (SATA) connectors are used to connect the Serial ATA device. SATA 3.0 is sup-
ported by the five SATA ports and provides data rate up to 6Gb/s. Connect one end of the Se-
rial ATA cable to a SATA connector and the other end to your Serial ATA device.
Features
• 4 Serial ATA 3.0 ports with data transfer rate up to 6Gb/s
• Integrated Advanced Host Controller Interface (AHCI) controller
• Support RAID 0, RAID 1, RAID 5, RAID 10
User's Manual | CMS630
SATA Pin Assignment
„
7
GND
RX+
RX-
GND
TX-
TX+
GND
1
SATA 0/1
from left to right
SATA 2/3
from left to right

Internal I/O Connectors

X

Digital I/O Connector

11 20
10 1
The 16-bit Digital I/O connector provides powering-on function to external devices that are
connected to these connectors. The pin functions of the 16-bit digital I/O connector are listed
below.
Pin Assignment
1 GND
3 DIO7
5 DIO5
7 DIO3
9 DIO1
11 DIO8
13 DIO10
15 DIO12
17 DIO14
19 GND
Chapter 2
HARDWARE INSTALLATION
Pin Assignment
2 GND
4 DIO6
6 DIO4
8 DIO2
10 DIO0
12 DIO9
14 DIO11
16 DIO13
18 DIO15
20 ---
24