Raven SmarTrax Installation Manual page 20

Chapter 3
Locate and disconnect the machine's tank hose from the steel tank line.
1.
Note:
The steel tank line runs on the right inside of the frame from the rear of the machine. Trace the
tank line from the tank port of the steering orbital if necessary.
Install a -8 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-028) on the steel tank line.
2.
Connect the machine's tank hose to the opposite end of the installed tee fitting.
3.
Install the -8 end of the supplied hydraulic hose (P/N 214-1000-658) on the 90° end of the installed tee
4.
fitting.
Connect the -6 end of the installed hydraulic hose to the fitting installed in Port T of the SmarTrax valve
5.
(P/N 334-0003-088).
16
Case IH Patriot 4420 (2009 & Newer), SPX 4410/4420 (2008 & Older), SPX 4260 (S/N JFG003537 & Newer) SmarTrax™ Installation Manual