Raven SmarTrax Installation Manual page 18

Chapter 3
Install a -6 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-069) on the open left steering cylinder
3.
port.
Install the straight end of the supplied hydraulic hose (P/N 214-1000-318) on the opposite end of the
4.
installed tee fitting.
Connect the 90° end of the installed hydraulic hose to the fitting in Port B3 of the installed flow switch.
5.
Second Left Steering Hose Installed
FIGURE 9.
Install the 90° end of the supplied hydraulic hose (P/N 214-1000-884) on the 90° end of the installed tee
6.
fitting.
Install the straight end of the installed hydraulic hose to the fitting installed in Port A of the SmarTrax valve
7.
(P/N 334-0003-088).
Locate and disconnect the machine's right steering hose from the right steering cylinder.
8.
Right Steering Hose Installed
FIGURE 10.
Install a -6 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-069) in the open right steering cylinder
9.
port.
Connect the machine's right steering hose to the opposite end of the installed tee fitting.
10.
Install the 90° end of the supplied hydraulic hose (P/N 214-1000-659) on the 90° end of the installed tee
11.
fitting.
Connect the straight end of the installed hydraulic hose the fitting installed in Port B of the SmarTrax valve.
12.
14
Case IH Patriot 4420 (2009 & Newer), SPX 4410/4420 (2008 & Older), SPX 4260 (S/N JFG003537 & Newer) SmarTrax™ Installation Manual