Raven SmarTrax Installation Manual page 17

Machine's Left and Right Steering Hoses
FIGURE 5.
Locate the machine's left and right steering hoses on the steering orbital.
2.
Left and Right Steering Hoses Installed
FIGURE 6.
RIght
Disconnect the machine's left steering hose from the steering orbital port labeled 'L'.
3.
Install a 12L, M18 x 1.5 M/M/F swivel run tee adapter fitting (P/N 333-0012-356) in the open L port of the
4.
steering orbital.
Connect the machine's left steering hose to the opposite end of the installed tee fitting.
5.
Install the 45° end of the supplied hydraulic hose (P/N 214-1000-866) on the 90° end of the installed tee
6.
fitting.
Connect the 90° end of the installed hydraulic hose to the fitting installed in Port B of the SmarTrax valve
7.
(P/N 334-0003-088).
Disconnect the machine's right steering hose from the steering orbital port labeled 'R'.
8.
Install a 12L, M18 x 1.5 M/M/F swivel run tee adapter fitting (P/N 333-0012-356) in the open R port of the
9.
steering orbital.
Connect the machine's right steering hose to the opposite end of the installed tee fitting.
10.
Install the 45° end of the supplied hydraulic hose (P/N 214-1000-866) on the 90° end of the installed tee
11.
fitting.
Connect the 90° end of the installed hydraulic hose to the fitting installed in Port A of the SmarTrax valve.
12.
Manual No. 016-5033-101
Hydraulic Installation
Left
13