Raven SmarTrax Installation Manual page 18

Chapter 3
Machine's Pressure and Tank Hoses
FIGURE 7.
Locate the machine's pressure and tank hoses on the steering orbital.
13.
Disconnect the machine's pressure hose from the steering orbital port labeled 'P'.
14.
Install a 16S, M24 x 1.5 M/M/F swivel run tee adapter fitting (P/N 333-0012-360) in the open P port of the
15.
steering orbital.
Connect the machine's pressure hose to the opposite end of the installed tee fitting.
16.
Install the 45° end of the supplied hydraulic hose (P/N 214-1000-865) on the 90° end of the installed tee
17.
fitting.
Connect the 90° end of the installed hydraulic hose to the fitting installed in Port P of the SmarTrax valve.
18.
Disconnect the machine's tank hose from the steering orbital port labeled 'T'.
19.
Install a 12L, M18 x 1.5 M/M/F swivel run tee adapter fitting (P/N 333-0012-356) in the open T port of the
20.
steering orbital.
Connect the machine's tank hose to the opposite end of the installed tee fitting.
21.
Install the 45° end of the supplied hydraulic hose (P/N 214-1000-866) on the 90° end of the installed tee
22.
fitting.
Connect the 90° end of the installed hydraulic hose to the fitting installed in Port T of the SmarTrax valve.
23.
14 Valtra BT150, BT170, BT190, and BT210 SmarTrax Installation Manual