Install The Node Harness - Raven SmarTrax Installation Manual

•
Securely fasten the node using bolts or screws through at least two of the three mounting holes. When
mounted properly, the node should not become loose or rotate.

Install the Node Harness

6-Pin Deutsch Connector on Node Harness
FIGURE 4.
Connect the unlabeled 6-pin Deutsch connector to the mating connector on the machine's harness.
1.
Grommet in Bottom of Compartment
FIGURE 5.
Remove the rubber grommet in the bottom of the compartment.
2.
P/N 016-5031-008 Rev. A
Cab Component Installation
9