Raven SmarTrax Installation Manual page 13

Chapter 3
Node Harness Routed to Machine's Bulkhead
FIGURE 6.
Route the 21-pin bulkhead connector on the node harness into the hole in the bottom of the compartment.
3.
Node Harness Secured to Bulkhead
FIGURE 7.
From outside the cab, secure the bulkhead connector to the machine using the lock nut on the connector.
4.
Machine's Ground Bar
FIGURE 8.
Locate the machine's ground bar on the right side of the compartment.
5.
10
Buhler Versatile 260/290/310 Steering Ready, Model Year 2015 & Newer SmarTrax™ Installation Manual