Decoder Pocket - Silca Quattrocode Operating Manual

QUATTROCODE
4.2

Decoder pocket

A special device (E) is installed on the left-hand side of the machine to house the decoders when
they are not in use (fig. 12).
Fig. 12
The decoders provided are:
Fig. 13
The device is designed to house a third decoder (U103 - not provided), whose place is
occupied by an imitation decoder (U) which should never be removed.
The decoders must be replaced in the device after use.
Before starting to cut a key, the machine checks that all the housings are occupied. If not, the
machine stops and shows the following message on the display:
WARNING: this safety system ensures that the cutting tool is not used instead of the decoder, or vice
versa.
E
U101
decoder for setting the
clamp and decoding
LASER type keys
<DECODER WRONGLY
Copyright Silca 1999
U101
U102
U
U102
decoder for decoding
dimple keys
POSITIONED>
Operating manual - English
17