Safety Guide - Handling And Operation; Operating Environments; Machine Handling - Riso CZ180 User Manual

Safety Guide - Handling and Operation

This section describes the precautions to be observed and the information the user should be aware of when oper-
ating the machine.

Operating environments

Important!:
• Operate the machine under the following appropriate environment conditions.
Temperature range: 15° C to 30° C (59° F to 86° F)
Humidity range: 40% to 70% (noncondensing)

Machine Handling

A
WARNING:
• Do not place water containers or metallic objects on the machine. Fire or electric shock may occur if water or metal-
lic objects fall into the machine.
• Do not insert any metallic material or flammable substance into the machine through any opening. This can result
in fire or electric shock.
• Do not remove machine covers. Exposing internal parts may result in electric shock.
• Do not disassemble or rebuild the machine by yourself. This can result in fire or electric shock.
• If the machine emits excessive heat, smoke or foul odor, immediately turn off the POWER, unplug the power cord
and contact your service representative. Failure to do so can result in fire or electric shock.
• If something has dropped inside the machine, immediately turn off the POWER, unplug the power cord, and con-
tact your service representative. Failure to do so can result in fire or electric shock.
• Never stick your hands or fingers in the openings of the machine during operation.
• Keep loose clothing or long hair away from moving parts to avoid becoming entangled.
• Do not place heavy objects on the machine. The objects might fall and cause injury.
• Contact your service representative when moving the machine.
B
Caution:
• Do not open any cover or move the machine during operation.
• Unplug the power cord from the receptacle if you do not use the machine for a long time.
• The machine has precision parts and driving mechanism inside. Do not handle the machine in ways other than
those described in this guide.
• Do not apply any shock to the machine.
Before Starting to Use
Safety Guide - Handling and Operation 7