Clearing Cmos Settings - Alienware AURORA R11 Service Manual

Boot
Enable USB Boot Support
Load Legacy OPROM
Boot Option Priorities
Boot Option #1
Boot Option #2
Boot Option #3
Table 8. System setup options—Exit menu
Save & Exit
Save Changes and Reset
Discard Changes and Reset
Restore Defaults
Discard Changes
Save Changes

Clearing CMOS settings

Prerequisites
1. Follow the procedure in
2. Remove the left-side cover.
About this task
The following images indicate the location of the CMOS jumper and provide a visual representation of the clearing CMOS
procedure.
Steps
1. Disconnect the system-board power cable from the system board.
2. Remove the jumper plug from pins 217 and replace it on pins 216 (P216).
102
Before working inside your
Allows you to enable or disable the USB Boot control.
Allows you to enable or disable the Legacy Option ROM.
Displays the available boot devices.
Displays the first boot device. Default: UEFI: Windows Boot
Manager.
Displays the second boot device. Default: Onboard NIC
Device.
Displays the third boot device. Default: Onboard NIC
Device.
Allows you to exit system setup and save your changes.
Allows you to exit system setup and load previous values for
all system setup options.
Allows you to load default values for all system setup
options.
Allows you to exit your changes.
Allows you to save your changes.
computer.