Instruction For Transportation And Handling Of Batteries - ITRON SHARPFLOW SWB7 Quick Start Manual

SHARPFLOW SWB7 + CWB7

1.1 Instruction for transportation and handling of batteries

WARNING!
Lithium batteries are primary power sources with high energy content. If mistreated, they may
present a potential risk.
INFORMATION!
The manufacturer assumes no liability for customer failure.
Please observe the following instructions:
• Transport only in special packaging with special labels and transportation documents.
• Do not short-circuit, recharge, overcharge or connect with false polarity.
• Do not expose to temperature beyond the specified temperature range or incinerate the
battery.
• Do not crush, puncture or open cells or disassemble battery packs.
• Do not weld or solder to the body of the battery.
• Do not expose contents of battery to water.
• Remove the battery from device before returning to the manufacturer for service or warranty
reasons.
• Dispose battery packs in accordance with local regulations; where possible, recycle used
batteries.
WA-0092.0-EN-qs-06.13
SAFETY INSTRUCTIONS
www.itron.com
1
5