Teledyne Tekmar Versa User Manual page 69

You may wish to verify that your task was completed
properly. To do so, from the tool bar go to "Tools" and
using the pull down menu select "System Properties". The
"System Properties" screen will appear with a "Change
Justifications" tab. Scroll through the justifications to insure
that the addition or deletion step performed previously
has taken place. If it has not, it is possible to Add/Delete a
justification at this time.
Note: Change Justifications added or subtracted in the
System Properties screen will be applied globally,
while it is user specific if they are changed in the
Preferences screen.
Versa User Manual
Figure 5-14: System Properties - Change Justifications
21 CFR Part 11 Compliance • Page 5-9
www.teledynetekmar.com