Teledyne Tekmar Versa User Manual page 32

14. Clicking the add button causes the New Instrument
Properties screen to appear. From this screen, you
must specify a unique name for the instrument and
select one of the available ports that the instrument
will use for
communication.
name - The user must enter the name of the active or
selected instrument.
description - A user-defined, brief set of text to identify
the instrument.
product - Shows product type.
connection - The Versa connects through a USB port to
the user PC.
deactivate this Instrument profile - Disables the
instrument profile and releases the USB port, thus allowing
it to be used for another instrument.
15. To specify the configuration of the unit, click the
options tab. From this screen, the user can enable
the beeper, and configure the GC communication
requirements as noted in the instruction sheet
supplied with the GC/IO cable. (For further
information on these options please refer to the
Configuring an Active Unit section of this manual.)
16. Power the Versa on.
17. Connect to the unit that has just been setup.
18. To verify the name and status of the active unit, view
the Instrument Status window of the Main screen.
Versa User Manual
Figure 2-14: New Instrument Screen - General Tab
Figure 2-15: New Instrument Screen - Options Tab
Figure 2-16: Main Screen on Versa
Introduction • Page 2-11
www.teledynetekmar.com