Edit An Existing Account Permissions; Lockout - Teledyne Tekmar Versa User Manual

edit an existing account Permissions

1. Select the User Account from the User manager
screen.
2. Click the Properties button, then the Permissions
tab. The screen should display the current permissions
for that user.
3. Select the appropriate boxes.
4. Click oK.

Lockout

Users can be locked out after a set number of bad logon
attempts using the system Properties screen. You can
activate this function by following the directions below:
1. Click tools | system Properties.
2. Select the Connection tab.
3. Select the server will wait for... check box.
4. Enter the number of bad attempts to allow before
action is taken.
5. Select the action to be taken. There are two
available actions:
• Lockout the user for a set amount of time.
• Disable the user account.
6. Click oK.
When a user is locked out, the screen to the right will
appear when they try to log in.
When a user is disabled, the screen to the right will appear
when they try to log in.
Note: If a disabled account is selected, either the Administrator or a user with use edit permissions must enable the users
account or create a new one.
Versa User Manual
Figure 5-7: System Properties Screen
Figure 5-8: System Lockout: Time-out
Figure 5-9: User Disabled
21 CFR Part 11 Compliance • Page 5-5
www.teledynetekmar.com