Table of Contents
Advertisement
VIals
The Versa is designed to accomodate a 22mL
glass vial.
VIal coVer (optIonal)
An optional acrylic vial cover, for protection from hot vials,
is available for use with the Versa.
pressUre reGUlator
The Versa has a pressure regulator located directly
inside the plumbing compartment. The pressure
regulator regulates the pressure of the standby flow
and pressurization flow.
pressUre transdUcer
The Versa has a pressure transducer that monitors the
system pressure, static pressure, vial pressure, loop
pressure and leak check of the system.
sample loop
The Versa is equipped with a fixed volume 1mL sample
loop. Sample loops are available in 100, 250, 500µL as well
as 2, 3, and 5mL volumes. The sample loop is filled from the
sample vial via a positive pressure displacement. The loop
is connected to a 6-port valve that allows for the sample
volume to be swept to the GC for analysis.
Versa User Manual
Septum
(Teflon®
face down
toward vial
opening)
Figure 1-4: Vial
Figure 1-5: Vial Cover
Figure 1-6: Pressure Transducer
Figure 1-7: Sample Loop
Introduction • Page 1-9
Cap
Sample Vial
www.teledynetekmar.com
Advertisement
Table of Contents
Troubleshooting
