Connecting To The Versa; Usb Driver Installation - Teledyne Tekmar Versa User Manual

Usb drIVer InstallatIon

In order for the Versa to communicate with your PC, you will need to install the drivers for the USB port. At this step,
the process will be different depending on which operating system you have on your PC. Follow the steps below that
pertain to your PC's operating system.
If you are running Windows xp:
1. When you power up the Versa, the found new
hardware Wizard will begin. Choose no, not this time,
and click next.
2. Choose Install the software automatically and click
next. The Wizard will then install the new software.
3. Once the install is complete click finish to close
the Wizard.
Versa User Manual

connecting to the Versa

Introduction • Page 2-12
Figure 2-17: Found New Hardware Wizard
Figure 2-18: Install Software Screen
Figure 2-19: Install Complete Screen
www.teledynetekmar.com