Table of Contents
Advertisement
74
1-2. Child safety
If the head restraint does not
3
interfere
restraint system installation,
install the head restraint.
Rear center seat
Adjust the head restraint to
1
the upmost position.
If the head restraint interferes
with your child restraint system,
and the head restraint can be
removed,
restraint. (P. 304)
Flip down the board, and
2
latch the hook onto the
anchor bracket and tighten
the top tether strap.
Make sure the top tether strap is
securely latched.
When
installing
restraint system with the head
restraint being raised, be sure to
have the top tether strap pass
underneath the head restraint.
■
Laws and regulations pertaining to anchors
The LATCH system conforms to FMVSS225 or CMVSS210.2.
Child restraint systems conforming to FMVSS213 or CMVSS213 specifica-
tions can be used.
This vehicle is designed to conform to SAE J1819.
with
the
child
remove
the
head
the
child
Top tether strap
Hook
Advertisement
Table of Contents
