Toyota Prius Prime 2020 Manual page 501

Table of Contents

Advertisement

Change the airflow mode
Move the airflow change knob
upwards
or
change the airflow mode.
The
air
outlets
switched each time the knob is
operated.
Air flows to the upper body
1
Air flows to the upper body
2
and feet
Air flows to the feet
3
Air flows to the feet and the
4
windshield defogger oper-
ates
S-FLOW mode
In S-FLOW mode, priority for the airflow is given to the front seats,
reducing the airflow and air conditioning effect on the rear seats.
When a passenger is not detected in the front passenger seat,
depending on the set temperature and ambient temperature, prior-
ity for the airflow will be given to the driver's seat only.
However, air will always be blown from the side outlet of the front pas-
senger seat.
The following S-FLOW modes are available:
Automatic S-FLOW mode
The system determines whether or not a rear passenger is in the
vehicle by the opening and closing of a rear door. When a rear
passenger is determined to be in the vehicle, S-FLOW mode will
be automatically disabled.
To enable S-FLOW mode again, press
S-FLOW mode. (P. 507)
The
enabled.
6-1. Using the air conditioning system and defogger
downwards
to
used
are
indicator will illuminate when S-FLOW mode is
501
Airflow change
knob
and enter manual
6

Advertisement

Table of Contents
loading

Table of Contents