Table of Contents
Advertisement
Remove the filter.
2
Remove dust using a vac-
3
uum cleaner etc. to clean the
filter.
Also, remove dust on the grille
as well as on the filter using a
vacuum cleaner.
Reinstall the filter to the origi-
4
nal position.
Be careful not to deform the fil-
ter or allow a gap between the
filter and the installation posi-
tion when installing the filter.
Insert the tabs at the edge of
5
the grille to the positions, and
push the opposite side edge
in to secure the grille.
Reinstall the grille to the original
position while turning over the
rubber portion.
Start the hybrid system and check that the warning message on
6
the multi-information display disappears.
It may take several minutes before the warning message disappears.
7-1. Maintenance and care
571
7
Advertisement
Table of Contents
