Table of Contents
Advertisement
Connect the bottle to the com-
9
pressor.
As shown in the illustration, insert
the bottle securely into the com-
pressor until the upper side of the
mark on the bottle is aligned with
the upper end of the notch.
Attach the sticker provided with
10
the tire puncture repair kit to a
position easily seen from the
driver's seat.
Check the specified tire inflation
11
pressure.
Tire inflation pressure is specified
on the label on the driver's side
pillar as shown. (P. 725)
Start the hybrid system. (P. 336)
12
8-2. Steps to take in an emergency
687
(U.S.A.)
(Canada)
8
Advertisement
Table of Contents
