Toyota Prius Prime 2020 Manual page 559

Reprogramming a single HomeLink
■
When the following procedure is performed, buttons which already
have devices registered to them can be overwritten:
With one hand, press and hold the desired HomeLink
1
When the HomeLink
2
to hold the HomeLink
®
HomeLink "
to start flashing).
Operating the HomeLink
Press the appropriate HomeLink
light should turn on.
Garage door operation indicators
The status of the opening and
closing of a garage door is shown
by the indicators.
Opening
1
Closing
2
This function is only available if the
garage door opener motor used is
a compatible device. (To check
device compatibility,
www.HomeLink.com.)
Color
Orange (flashing)
Green
Red (flashing)
The indicators can operate within approximately 820 ft. (250 m) of the
garage door. However, if there are obstructions between the garage
door and the vehicle, such as houses and trees, feedback signals
from the garage door may not be received. To recall the previous door
operation status, press and release either HomeLink
and
recorded status will be displayed for 3 seconds.
6-4. Using the other interior features
®
indicator starts flashing orange, continue
®
button and perform "Programming the
(it takes 20 seconds for the HomeLink
1
®
®
button. The HomeLink
refer to
or and
®
button
Status
Currently opening/closing
Opening/closing has completed
Feedback signals cannot be received
simultaneously. The last
559
®
button.
®
indicator
®
indicator
6
®
buttons