Table of Contents
Advertisement
■
Charging connector locking system
●
If the charging connector lock switch is operated repeatedly, the charging
connector locking system may not work to protect the system. In this case,
wait for a while before operating the switch again.
●
The charging connector locking system does not guarantee to prevent theft
of the charging cable, and is not necessarily effective for all the situations.
■
When the charging connector cannot be inserted into the charging inlet
Check that the connector lock pin is not
lowered.
If the connector lock pin is lowered, the
connector lock is operating. Carry an
electronic key or unlock the doors, and
then press the charging connector lock
switch to unlock the connector lock and
check that the connector lock pin is not
lowered.
■
If the smart key system has been deactivated in a customized setting
●
The smart lid & connector locking system will also be deactivated. If the
smart key system has been deactivated in a customized setting, the
charging connector can be locked and unlocked by performing the following
procedure.
Unlock the doors using the wireless remote control or door lock switch.
1
(P. 280, 281)
Insert the charging connector into the charging inlet (only when locking
2
the charging connector).
Press the charging connector lock switch.
3
The charging connector will lock or unlock.
●
When the charging connector lock setting (P. 126) is set to "Auto Lock",
the above procedures are only necessary when unlocking. When set to
"Auto Lock & Auto Unlock", the connector lock function operates, even if the
smart key system is deactivated.
2-2. Charging
Connector lock pin
127
2
Advertisement
Table of Contents
