Table of Contents
Advertisement
■
During charging
●
The surface of the CCID (Charging Circuit Interrupting Device) may become
hot, but this does not indicate a malfunction.
●
Depending on radio wave conditions, interference may be heard on the
radio.
●
The current charging condition and the estimated time until charging will
complete can be checked on the multi-information display or 11.6-inch dis-
play (if equipped). (P. 140, 271)
●
During charging, the hybrid battery (traction battery) status indicator illumi-
nates and flashes, and changes according to the charging amount.
(P. 112)
■
If the charging indicator flashes after connecting the charging cable
The charge schedule (P. 157) is registered and charging cannot be per-
formed. To cancel charging using the timer and start charging, perform any of
the following procedures.
●
Turn "Charge Now" on (P. 166, 175)
●
While the charging indicator is flashing, remove and reconnect the charging
connector within 5 seconds
■
When the charging connector cannot be inserted into the charging inlet
(vehicles with smart lid & connector locking system)
P. 127
149
2-2. Charging
2
Advertisement
Table of Contents
