Toyota Prius Prime 2020 Manual page 186

Table of Contents

Advertisement

186
2-2. Charging
Likely cause
 If "Charging Stopped Due to Pulled Charging Connector" is shown
Charging connector is not
securely connected
Latch
release
charging
connector
pressed while charging
 If "Charging Complete Limited Due to Battery Temp" is shown
Charging was stopped to
protect the hybrid battery
(traction battery) as it contin-
ued to remain hot for a cer-
tain period of time.
Check the connection status of the charging
connector.
• When connecting the charging connec-
tor, make sure not to touch the latch
release button. Insert the charging con-
nector securely until you hear a click. The
charging connector may not be connected
correctly if the latch release button is
pressed while inserting.
• After connecting the charging connector,
check that the latch release button is not
pressed and the charging indicator is
turned on.
If charging cannot be carried out, even
though the proper procedures were fol-
lowed, have the vehicle inspected by your
Toyota dealer.
button
of
When the latch release button is pressed
was
while charging, charging stops. To continue
charging, reconnect the charging connector.
Allow the hybrid battery (traction battery) to
cool down and perform charging again if the
charging amount has not reached the
desired amount.
Correction procedure

Advertisement

Table of Contents
loading

Table of Contents