Table of Contents
Advertisement
S-FLOW mode
■
In S-FLOW mode, priority for the airflow is given to the front seats,
reducing the airflow and air conditioning effect on the rear seats.
When a passenger is not detected in the front passenger seat,
depending on the set temperature and ambient temperature, prior-
ity for the airflow will be given to the driver's seat only.
However, air will always be blown from the side outlet of the front pas-
senger seat.
The following S-FLOW modes are available:
Automatic S-FLOW mode
The system determines whether or not a rear passenger is in the
vehicle by the opening and closing of a rear door. When a rear
passenger is determined to be in the vehicle, S-FLOW mode will
be automatically disabled.
To enable S-FLOW mode again, press
S-FLOW mode. (P. 518)
The
indicator will illuminate when S-FLOW mode is enabled.
Manual S-FLOW mode
When
disabled. (P. 518)
The
indicator will illuminate when S-FLOW mode is enabled.
When the power switch is turned to ON mode, the system is oper-
ated in automatic S-FLOW mode.
Other functions
■
● Switching between outside air and recirculated air modes
(P. 514)
● Defogging the windshield (P. 514)
● Defogging the rear window and outside rear view mirrors
(P. 515)
Using automatic mode
Select
1
Adjust the temperature setting. (P. 512)
2
To stop the operation, select
3
6-1. Using the air conditioning system and defogger
is pressed, S-FLOW mode will be manually enabled/
on the air conditioning control screen.
and enter manual
.
513
6
Advertisement
Table of Contents
