Connecting A Computer; Step 1: Connecting Data And Voice Devices - Avaya G350 Installing And Upgrading

Figure 7: The MM314 media module
Figure 8: The MM316 media module

Connecting a computer

You can connect a computer to any of the following:
A switch connected to the G350
●
The data port of an IP telephone connected to a PoE port on the G350
●
One of the following data ports on the MM314 media module, if installed:
●
24 Ethernet 10/100 Base-T Ethernet access ports with inline Power over Ethernet (PoE)
●
The copper Gigabit port, labelled 51
●
One of the following data ports on the MM316 media module, if installed:
●
40 Ethernet 10/100 Base-T Ethernet access ports with inline Power over Ethernet (PoE)
●
The copper Gigabit port, labelled 51
●
One of the following ports on the front panel of the Avaya G350 Media Gateway chassis:
●
The ETH LAN port
●
The ETH WAN port
●
To connect the computer to the ETH LAN, ETH WAN, MM314 ports, or MM316 ports, use a
straight network cable with an RJ-45 connector or a crossover cable with an RJ-45 connector.

Step 1: Connecting data and voice devices

Issue 3.1 June 2006 47