Connecting A Server - Avaya G350 Installing And Upgrading

Connecting devices

Connecting a server

You can connect a server to any of the following:
A switch connected to the Avaya G350 Media Gateway
●
One of the following ports on the MM314 media module, if installed:
●
24 Ethernet 10/100 Base-T Ethernet access ports with inline Power over Ethernet (PoE)
●
The copper Gigabit port, labelled 6/51
●
One of the following ports on the MM316 media module, if installed:
●
40 Ethernet 10/100 Base-T Ethernet access ports with inline Power over Ethernet (PoE)
●
The copper Gigabit port, labelled 51
●
One of the following ports on the front panel of the Avaya G350 Media Gateway chassis:
●
The ETH LAN port
●
The ETH WAN port
●
To connect the server to the ETH LAN, ETH WAN, MM314, or MM316 ports, use a straight
network cable with an RJ-45 connector or a crossover cable with an RJ-45 connector.
48 Installation and Upgrades for the Avaya G350 Media Gateway