Connecting devices
Connecting a DCP telephone
This section explains how to connect a DCP telephone.
!
WARNING:
The ports on the DCP media modules are intended for in-building use only.
WARNING:
Phone lines connected to these ports are not to be routed out-of-building. Failure
to comply with this could cause harm to personnel and equipment.
To connect a DCP telephone to an MM312 or MM712 media module:
1. Wire a telephone port to a DCP port on the G350. The following media modules provide
DCP telephone ports:
- MM312. 24 DCP ports
- MM712. 8 DCP ports
- MM717. 24 DCP ports, provided via a single 25-pair amphenol socket on the front panel.
To connect the MM717 media module to a punch down block to enable telephone
connection, see
page 55.
Figure 14: The MM312 media module
Figure 15: The MM712 media module
52 Installation and Upgrades for the Avaya G350 Media Gateway
Connecting devices to the MM717 and MM716 media modules
on