Ethernet/Ip - Lenze i550 Series Mounting Instructions

EtherNet/IP

Status displays at the RJ45 sockets
The LEDs at the RJ45 sockets indicate the connection status to the network:
LED "Link" (green)
off
on
LED "Activity" (yellow)
off
on or flickers
Typical topologies
Line
S
A1 A2
S Scanner
A Adapter
Basic network settings
The rotary encoder switch allows you to set the last byte of the IP address.
Setting
0x00
0x01 ... 0xFE
0xFF
Status/meaning
No connection to the network.
A physical connection to the network is available.
Status/meaning
No data transfer.
Data is exchanged via the network.
R
An SW1
x16
Value of last byte
Value from parameter
Switch position
Default setting
Tree Ring
S
SWn
SW2
SW Switch
x1
Resulting IP address
Value from parameter
192.168.124.<switch position>
192.168.124.16
Electrical installation
EtherNet/IP
S
An
DLR
A3 A2
Networks
A1
91