Application As Directed; Handling - Lenze i550 Series Mounting Instructions

Safety instructions

Handling

Application as directed

• The product serves to control three-phase AC motors and servo motors.
• The product must only be actuated with motors that are suitable for the operation with inverters.
• The product is not a household appliance, but is only designed as a component for commercial or
professional use in terms of EN 61000−3−2.
• Depending on the degree of protection, the product can be mounted inside and outside control cabinets.
• The product must only be actuated under the operating conditions and power limits specified in this
documentation.
• The product meets the protection requirements of2014/35/EU: Low-Voltage Directive.
• The product is not a machine in terms of 2006/42/EU: Machinery Directive, with the exception of all
functions of the functional safety.
• Commissioning or starting the operation as directed of a machine with the product is not permitted until
it has been ensured that the machine meets the regulations of the EC Directive 2006/42/EU: Machinery
Directive observe; EN 60204−1 .
• Commissioning or starting operation as directed is only permissible if the EMC Directive 2014/30/EU is
complied with.
• In residential areas, the product may cause EMC interferences. The operator is responsible for taking
interference suppression measures.
The user is not allowed to change inverters that come with integrated safety technology.
The user must not carry out any repairs on the safety module.
The safety module is not a spare part.
The safety module must not be removed.
If the safety module is defective, the inverter has to be replaced.
Handling
• Never commission the product in the event of visible damage.
• The product must never be technically modified.
• Never commission the product before assembly has been completed.
• The product must never be operated without required covers.
• Establish, separate and change all electrical connections only in deenergised state!
64