Table of Contents
Advertisement
Media Settings
PD43 and PD43c Commercial Printer User Manual
This section describes media settings for the printer. To view these
settings:
From the printer Main Menu, select Settings > Printing > Media.
•
•
From the printer web page, click the Configure tab, Printing >
Media.
Note: If you are using an icon printer that is not on a network, you
need to use PrintSet 5 through a USB connection to configure media
settings.
Media Settings
Setting
Description
Media Type
Selects the type of media that is loaded in
the printer.
Print Method Selects the method of printing that the
printer is using.
Media Margin
Sets the width of the margin from the left
(X)
edge of the label along the printhead to the
edge of the printable area. Unit of
measurement is defined in the Unit of
Measurement parameter.
Appendix B — Default Settings
*935-044-001*
INTERMEC
6001 36th Ave W
Default
Media With
Gaps
Ribbon (TTR)
for thermal
transfer
printers, or No
Ribbon (DT)
for direct
thermal
printers
Variable
159
Advertisement
Table of Contents
