Media Settings - Honeywell PC42E-T User Manual

IPv6
Setting
IP Assignment
Method
IP Address
802.1x Authentication
Setting
802.1x Security
EAP Type
Username
Password
CA Certificate
Client Certificate
Private Key

Media Settings

This section describes media settings for the printer. To view these settings:
•
•
Setting
Media Type
Print Method
44
Description
Specifies how the printer obtains an IP address (for IPv6
networks).
Specifies the unique network-level address that is
assigned to each device in a TCP/IP network (IPv6).
Description
Enable or disable 802.1x Security.
Selects the protocol that the radio uses to verify its
identity and ensures that it is authorized to communicate
on the network.
User name for Ethernet 802.1x Authentication.
Password for PEAP authentication or private-key
password for TLS.
Sets the name of the Certificate Authority (CA) that
verifies the server certificate. The CA should be the same
that was used to sign the certificate.
Sets the name of the client certificate the printer uses to
authenticate to the network using EAP-TLS. Maximum
length is 128 characters.
Sets the full path to the private key file the printer uses for
EAP-TLS. Maximum length is 128 characters. For a pfx
file, the client certificate should not be specified.
From the printer web page, click Configure > Printing > Media.
From PrintSet 5, click Configuration > Printing > Media.
Description
Selects the type of media that is loaded in the printer.
Selects the method of printing that the printer is using.
PC42E-T Desktop Printer User Guide
Default
Automatic
Automatic
Default
Disable
PEAPv0-
MSCHAPv2
None
None
None
None
None
Default
Media with Gaps
Thermal Transfer