Table of Contents
Advertisement
How to Connect the Printer to Your PC
Connect the Printer Using a USB Cable
PD43 and PD43c Commercial Printer User Manual
7 When you reach the InstallShield Wizard Complete page, click
Next. The InterDriver Wizard appears.
8 From the Welcome to InterDriver Wizard page, make sure Install
printer drivers is selected and then click Next.
9 Follow the onscreen instructions in the InterDriver Wizard.
10 When you reach the Completing the InterDriver Wizard page, click
Finish.
11 When the InterDriver Wizard Completed Successfully page
appears, click Next.
12 Follow the onscreen instructions to complete the Post-Setup
Tasks.
13 When the Installation Complete! page appears, click Finish.
The installer unpacks and installs the InterDriver files in the
Intermec\InterDriver folder in your program files directory and
creates two shortcuts in the Windows Start menu:
•
Intermec > InterDriver > InterDriver Wizard
•
Intermec > InterDriver > Check for Updates
You can connect the printer to your PC using one of these cables:
•
USB cable
•
USB-to-Serial adapter cable
•
USB-to-Parallel adapter cable
The printer supports USB connections to a desktop PC. You do not
need to set up any parameters for USB communications.
Note: You must install InterDriver to use a USB connection to a
Windows PC. For more information, see the PrinterCompanion CD
that came with your printer.
1 Download and install the InterDriver software on your PC.
Chapter 3 — Connect the Printer
79
Advertisement
Table of Contents
