Wireless 802.11 Network Settings - Honeywell Intermec PD43 User Manual

Wireless 802.11 Network Settings

PD43 and PD43c Commercial Printer User Manual
This section describes the 802.11 IPv4 and IPv6 settings. To view these
settings:
From the printer Main Menu, select Settings > Communications
•
> Wireless 802.11 > Network > IPv4 or IPv6.
• From the printer web page, click the Configure tab,
Communications > Wireless 802.11.
Wireless 802.11 Network Settings
Setting Description
(IPv4) IP Sets how the printer obtains an IP
Assignment address (for IPv4 networks).
Method
(IPv4) IP Address Sets the unique network-level address
that is assigned to each device in an
IPv4 network.
Subnet Mask Sets a number that defines the range of
IP addresses that can be used in an IPv4
network.
Default Router Sets the IP address of a router that is
used when a device sends a packet to
another subnet or to an unknown
destination.
DHCP Response Sets if the printer receives DHCP
responses by broadcast or unicast.
(IPv6) IP Sets how the printer obtains an IP
Assignment address (for IPv6 networks).
Method
(IPv6) IP Address Sets the unique network-level address
that is assigned to each device in an
IPv6 network.
Appendix B — Default Settings
Default
DHCP
0.0.0.0
0.0.0.0
0.0.0.0
Broadcast
Automatic
Automatic
169