Appendix B — Default Settings
156
Error Alerts
Error alerts are sent when a condition occurs that prevents the printer
from printing, such as running out of media. These alerts include:
•
Out of Media
•
Out of Ribbon
•
Printer in Pause Mode
•
Printer in Menu Mode
Application Break
•
•
RFID Not Installed
•
Printhead Lifted
•
Printhead Not Detected
Information Alerts
Information alerts are sent when a print job is started or completed, or
when the printer is rebooting. These alerts include:
Print Job Complete
•
•
Printer is Rebooting
•
Started (Sent when a print job has begun)
Warning Alerts
Warning alerts are sent when the printer may need attention shortly,
such as when the printhead needs maintenance, or when the odometer
has reached a present value. A warning alert is also sent when the
printer firmware is being upgraded. Warning alerts include:
•
Ribbon Installed (Sent when the printer is set for direct thermal
printing but has ribbon installed for thermal transfer printing)
•
Ribbon Low
•
Upgrading Firmware
•
Odometer (User Resettable)
•
Odometer (Printer)
Replace Printhead
•
•
Clean Printhead
PD43 and PD43c Commercial Printer User Manual