Table of Contents
Advertisement
Chapter 1 — About the Printers
26
PD43 Printer Options and Accessories (Continued)
Option or Accessory
Cutter
Cutter Tray
Boarding Pass Tray
Label Dispenser
Label Taken Sensor
Linerless Media Roller
Thick Media Springs
Notchless Ribbon Core Adapter
USB-to-Serial Adapter
USB-to-Parallel Adapter
Extension cables
Flat top window
External media holder
Description
Provides automatic cutting as labels are
printed.
Holds up to 20 labels as they are cut.
Installs on Cutter.
Holds airline boarding pass media.
Installs on Cutter.
Removes paper backing and presents
labels one at a time for pickup. Includes
Label Taken Sensor.
Detects when a label is printed and
pauses printing until the printed label is
removed.
Non-stick platen roller dispenses printed
labels when you use linerless media stock.
Heavier-gauge springs increase printhead
pressure for best results when printing on
tag media.
Enables use of ribbon with notchless core
of less than 2.5 mm (1 in) diameter or
10.16 cm (4 in) wide. For thermal transfer
printing.
USB to RS-232 adapter. Connects to
printer USB Host port and provides serial
connectivity to a PC.
USB to IEEE 1284 adapter. Connects to
printer USB Host port and provides
DB25 connectivity to a PC or other
equipment.
Cables provide access to the USB Host,
USB Device, and Ethernet ports without
the need to access the PD43 bottom
panel.
Replaces the PD43 dome window for use
with 12.5 cm (5 in) media. For PD43 only.
Provides support for media up to 21.27
cm (8.375 in) for the PD43c.
PD43 and PD43c Commercial Printer User Manual
Advertisement
Table of Contents
