Ethernet Settings; Media Settings - Honeywell PM42 User Manual

Ethernet Settings

Ethernet Settings
Setting
(IPv4) IP Assignment
Method
(IPv4) IP Address
Subnet Mask
Default Router
DHCP Response
(IPv6) IP Assignment
Method
(IPv6) IP Address

Media Settings

Media Settings
Setting
Media Type
Print Method
PM42 Mid-Range Printer User Manual
Ethernet settings include IPv4 and IPv6 settings.
Description
Specifies how the printer obtains an IP
address.
Specifies the unique network-level address that
is assigned to each device in a TCP/IP network
(IPv4).
Specifies a number that defines the range of IP
addresses that can be used in a TCP/IP
network.
Specifies the IP address of a router that is used
when a device sends a packet to another
subnet or to an unknown destination.
Specifies if the printer receives DHCP
responses by broadcast or unicast.
Specifies how the printer obtains an IP address
(for IPv6 networks).
Specifies the unique network-level address that
is assigned to each device in a TCP/IP network
(IPv6).
Configure media settings for the size, type, and position of your media.
Description
Selects the type of media that is loaded in the
printer.
Selects the method of printing that the printer is
using.
Appendix B — Default Settings
Default
DHCP
0.0.0.0
0.0.0.0
0.0.0.0
Broadcast
Automatic
Automatic
Default
Media With Gaps
Ribbon (TTR) for
thermal transfer
printers, or No
Ribbon (DT) for
direct thermal
printers
85