Honeywell Intermec PD43 User Manual page 131

Commercial
Table of Contents

Advertisement

PD43 and PD43c Commercial Printer User Manual
Problems and Possible Solutions (Continued)
Problem
Printing on regular media (not
RFID) is slow and halted in
between labels.
I am using an application to write
to RFID tags and the printer is
printing "VOID" labels.
I receive this message "No RFID
tag found."
When I send a TAGREAD or
TAGWRITE command, I get this
error message: "Tag format
error."
My icon printer uses the ZSim
printer language and prints
configuration labels every time I
turn the power on.
Chapter 5 — Troubleshoot the Printer
Possible Solution
RFID is enabled. Disable RFID from the
web page or the Main Menu.
Try these possible solutions:
The printer may not recognize the
RFID media type. Restart the printer
or run the media or RFID calibration
wizard.
You may need to modify the Tag
Position parameter.
You may need to adjust the output
power (field strength) to the antenna.
Try these possible solutions:
Make sure you are using RFID media.
You may need to modify the Tag
Position parameter.
The tag may be broken. Try printing
on a different label.
The TAGFORMAT defined for the
operation determines the number of
required parameters. You may need to
modify the TAGFORMAT. For help, see
the
Intermec Fingerprint Command
Reference Manual
or the
Command Reference
information, see the EPC Tag Data
Standard (v1.1, revision 1.27) available
from the EPCglobal website at
www.epcglobalinc.org.
Icon printers running ZSimprint
configuration labels on startup by
default. To prevent this, use Notepad to
create a .txt file named
"STLABPD41nPM43.txt". In the file, type
"0". Copy the file to the /home/user
directory on the printer.
IPL
Manual. For more
117

Advertisement

Table of Contents
loading

This manual is also suitable for:

Intermec pd43c

Table of Contents